EngineeringFitsEnglish tool

The engineering workbench / general tolerances

ISO 2768:2026: What Changed and How to Apply It

ISO 2768:2026 (Edition 2) replaces ISO 2768-1:1989 and covers general tolerances for linear and angular sizes only. This page explains the change and how to read legacy drawings; it publishes no 2026 tolerance values.

LEGACY 1989 TABLEf · m · c · v classes
ISO 2768-1:1989 linear tolerance classes f, m, c and v by size rangeGrouped bars on a logarithmic scale for the site's ISO 2768-1:1989 linear table, size ranges 0.5–3, 6, 30, 120, 400, 1000, 2000, 4000 mm. f: ±0.05, ±0.05, ±0.1, ±0.15, ±0.2, ±0.3, ±0.5, none; m: ±0.1, ±0.1, ±0.2, ±0.3, ±0.5, ±0.8, ±1.2, ±2; c: ±0.2, ±0.3, ±0.5, ±0.8, ±1.2, ±2, ±3, ±4; v: none, ±0.5, ±1, ±1.5, ±2.5, ±4, ±6, ±8. A dash means no value is tabulated. These are legacy 1989 values to be verified against the original table, not ISO 2768:2026 values.±0.05±0.1±0.5±1±5f, 0.5 to 3 mm: ±0.05 mmm, 0.5 to 3 mm: ±0.1 mmc, 0.5 to 3 mm: ±0.2 mm–0.5–3f, >3 to 6 mm: ±0.05 mmm, >3 to 6 mm: ±0.1 mmc, >3 to 6 mm: ±0.3 mmv, >3 to 6 mm: ±0.5 mm6f, >6 to 30 mm: ±0.1 mmm, >6 to 30 mm: ±0.2 mmc, >6 to 30 mm: ±0.5 mmv, >6 to 30 mm: ±1 mm30f, >30 to 120 mm: ±0.15 mmm, >30 to 120 mm: ±0.3 mmc, >30 to 120 mm: ±0.8 mmv, >30 to 120 mm: ±1.5 mm120f, >120 to 400 mm: ±0.2 mmm, >120 to 400 mm: ±0.5 mmc, >120 to 400 mm: ±1.2 mmv, >120 to 400 mm: ±2.5 mm400f, >400 to 1000 mm: ±0.3 mmm, >400 to 1000 mm: ±0.8 mmc, >400 to 1000 mm: ±2 mmv, >400 to 1000 mm: ±4 mm1000f, >1000 to 2000 mm: ±0.5 mmm, >1000 to 2000 mm: ±1.2 mmc, >1000 to 2000 mm: ±3 mmv, >1000 to 2000 mm: ±6 mm2000–m, >2000 to 4000 mm: ±2 mmc, >2000 to 4000 mm: ±4 mmv, >2000 to 4000 mm: ±8 mm4000Nominal size range, upper limit · mmPERMISSIBLE DEVIATION ± mm (log scale)fmcv

1989 legacy values from this site’s calculator table · not ISO 2768:2026 · to be verified

01 / What changed

ISO 2768:2026: The New General-Tolerance Standard Explained

ISO 2768:2026 is the second edition of the general-tolerance standard for linear and angular sizes. The ISO catalogue lists it as published on 2026-11-09 and as the replacement for ISO 2768-1:1989. Its scope is now limited to linear and angular sizes: linear sizes from 0.5 mm up to and including 4000 mm, plus angular sizes. It no longer covers distance-type dimensions, which are handled as a different kind of specification.

The companion geometrical standard has also moved on. ISO 2768-2:1989 has been replaced by ISO 22081:2021. A new drawing should therefore cite ISO 2768:2026 for its general linear and angular tolerances, and cite ISO 22081:2021 separately if it also needs general geometrical specifications. Legacy drawings are different: one that cites ISO 2768-1:1989, or an mK-style two-part callout, should still be interpreted to the standard editions that the callout represents. The m and K parts of mK belong to the older two-part system, not to the new single standard.

The on-site calculator at ISO 2768 currently still applies the 1989-edition linear tables. That makes it useful for legacy work, but it is not a source of ISO 2768:2026 values. Two claims often seen in summaries are not stated in the ISO abstract and must be checked against the official ISO 2768:2026 text before being relied on: that the four linear and angular tolerance classes from the 1989 edition are retained, and that the chamfer and rounding (external radii) table was removed. This page neither confirms those points nor invents tolerance values for them.

02 / On the drawing

How to apply ISO 2768:2026 on a drawing

  1. Read the drawing's title block and identify the standard and edition it cites. Do not assume that a new standard automatically governs an old drawing.
  2. For a drawing that cites ISO 2768-1:1989 or a two-part mK callout, use the ISO 2768 calculator for the 1989-edition linear tables, then apply the drawing's own geometrical requirements.
  3. For a new drawing that cites ISO 2768:2026, take the values from the official ISO 2768:2026 text, not from this calculator. The calculator has not yet been updated to that edition.
  4. Before looking up a value, confirm that the dimension is a linear or angular size rather than a distance-type dimension, which the 2026 edition excludes.
  5. If general geometrical specifications are required, cite ISO 22081:2021 and check it separately. An individually indicated tolerance or feature control frame still overrides a general specification.

03 / Questions

Frequently asked questions

When was ISO 2768:2026 published, and what does it replace?

ISO 2768:2026, the second edition, was published on 9 November 2026. It replaces ISO 2768-1:1989. The publication details and replacement relationship are shown on the ISO 2768:2026 catalogue page.

What is the scope of ISO 2768:2026?

It covers general specifications for linear and angular sizes. Linear sizes run from 0.5 mm up to and including 4000 mm, and angular sizes are included. It no longer applies to other dimensional specifications such as linear and angular distances. The abstract points readers to ISO 14405-2 for further information on distances and other types of dimensions.

Does ISO 2768:2026 cover distance-type dimensions?

No. The standard explicitly excludes distance-type dimensions and other types of dimensional specification beyond sizes. A distance between two features is not the same as the size of a feature. If a drawing dimension is a distance, check which specification actually applies rather than applying a general size tolerance by habit.

Does ISO 2768:2026 replace ISO 2768-2:1989?

No. ISO 2768-2:1989 has been replaced by ISO 22081:2021. ISO 2768:2026 is the replacement for ISO 2768-1:1989 and can be applied on its own or together with ISO 22081:2021, provided the interaction is unambiguous. A new drawing that needs both size and geometrical general specifications should cite both documents appropriately.

How should an existing ISO 2768-1:1989 or mK drawing be read?

Read it to the standard editions that the callout represents. A drawing that cites ISO 2768-1:1989 still refers to that edition, and an mK-style callout still combines the old Part 1 class for linear and angular dimensions with the old Part 2 class for geometrical tolerances. Do not silently reinterpret it as an ISO 2768:2026 callout. New drawings should cite the new standard explicitly.

Does the on-site ISO 2768 calculator apply the 2026 edition?

Not yet. The calculator at /en/iso-2768/ currently still applies the 1989-edition linear tables. Use it for legacy drawings that invoke the 1989 standard, and use the official ISO 2768:2026 text for a new 2026 callout. Do not treat a 1989-table result as a 2026 tolerance.

Are the four 1989 tolerance classes retained in ISO 2768:2026?

That is not stated in the ISO abstract. Commentary may say that the four classes are retained, but this page cannot confirm it from the public abstract alone. Check the official ISO 2768:2026 text before relying on the class structure for a new drawing. This page does not assume that the old classes carry over unchanged.

Was the chamfer and rounding table removed in ISO 2768:2026?

The ISO abstract does not say that. The claim that the chamfer and rounding (external radii) table was removed should be treated as unverified until it is checked against the official ISO 2768:2026 text. Do not design a new callout around that assumption, and do not use values from an unconfirmed table.

04 / Sources

Sources checked

To be verified against the official ISO 2768:2026 text: whether the four 1989 classes are retained, and whether the chamfer and external-radius table was removed. No Chinese counterpart exists yet. This page is not listed in the sitemap.