EngineeringFits中文 / Chinese version ↗

The engineering workbench / general tolerances

GB/T 1184 K Tolerance: General Geometrical Tolerances

Look up general straightness and flatness tolerances for classes H, K and L. These values come directly from the existing Chinese GB/T 1184 tool’s general-tolerance table.

This page covers the H/K/L straightness and flatness table, for lengths greater than 0 and up to 3000 mm. It does not convert the separate numbered Appendix B grades into H/K/L. For ISO perpendicularity, symmetry and circular run-out, see the ISO 2768-mK tool.

02 / Read the limits

Results

Size deviations use ±. Geometrical results are tolerance-zone widths.

CharacteristicResult · mmInterpretation

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

03 / How to use

How to use this calculator

  1. Use this GB/T 1184 calculator for straightness and flatness only. It reuses the GB/T 1184-1996 H/K/L table from the Chinese tool, also used for class K in the legacy ISO 2768-2:1989 calculator. It does not implement ISO 22081:2021.
  2. Choose the class from the drawing: H, K or L. A note such as GB/T 1184-K means class K.
  3. Enter a controlling length greater than 0 and up to 3000 mm: the line length for straightness, or the longer side of the surface (diameter for a circular surface) for flatness. Look up separate features separately.
  4. Read the permissible tolerance zone from the calculator result. Geometrical tolerances define a zone, not a plus-or-minus size deviation.
  5. Check the drawing for an explicit feature control frame or individually indicated geometrical tolerance. Those requirements override the general tolerance for the geometrical characteristic they control.

Table lookup, with explicit boundaries

Select the controlling-length interval and H, K or L → read the tolerance-zone width.
Straightness: use the corresponding line length.
Flatness: use the longer lateral length, or the diameter of a circular surface.
The result is a geometrical tolerance, not a ± size deviation.

The first interval includes its lower tabulated size. Each following interval excludes its lower endpoint and includes its upper endpoint. The calculator rejects inputs outside the stated range and does not round inputs across a boundary.

04 / Engineering context

GB/T 1184 K Tolerance: General Geometrical Tolerances for Untoleranced Features

GB/T 1184 K tolerance refers to class K in GB/T 1184-1996, the Chinese standard for general geometrical tolerances on features that have no individual tolerance indication. The standard provides three classes — H, K and L — so a drawing can invoke one class instead of repeating geometrical callouts on every feature. A title-block note such as GB/T 1184-K tells the reader that untoleranced geometrical characteristics follow class K requirements in the standard.

GB/T 1184 is mainly intended for features produced by material removal, and it may also be applied to features formed by other methods when the manufacturer has confirmed that its process can work within the standard's values. Its explicit tables address straightness and flatness, perpendicularity, symmetry and circular run-out, and the standard also gives rules for characteristics such as roundness and parallelism. It does not create a dedicated default for every geometrical characteristic, and it does not replace a functional GD&T scheme: position, profile and similar controls still need to be addressed explicitly where they matter.

GB/T 1184-1996 corresponds to ISO 2768-2:1989 and follows the same H, K and L class structure. The ISO counterpart has since been withdrawn and revised by ISO 22081:2021, while GB/T 1184-1996 remains the Chinese edition referenced here; confirm the edition and any customer-specific requirements before applying it to a new contract. The practical link is the class letter, not a claim that every clause of the two documents is word-for-word identical.

05 / GB · ISO · DIN

Compare the specified editions

StandardScope / classesRelationship used here
GB/T 1184-1996General geometrical tolerances; H, K, LThis calculator copies only the complete general straightness/flatness data from /form/.
ISO 2768-2:1989General geometrical tolerances; H, K, LThe same straightness/flatness lookup is reused for class K in the mK calculator. Linear dimensions belong to part 1.
DIN ISO 2768-2:1991-04German publication identical to ISO 2768-2:1989The same subject and class notation; use the exact edition called out by the drawing.

This page targets the named historical editions. ISO lists ISO 2768-1:1989 as withdrawn with ISO 2768:2026 available, and ISO 2768-2:1989 as withdrawn with ISO 22081:2021 available. These calculators do not implement the replacement standards. Use the edition specified on the drawing.

06 / Questions

Frequently asked questions

What does the K in GB/T 1184-K mean?

K is one of the three general geometrical tolerance classes in GB/T 1184, alongside H and L. It is not a linear size tolerance class; it selects the K values for the covered geometrical characteristics.

Is GB/T 1184 the same as ISO 2768-2?

GB/T 1184-1996 corresponds to ISO 2768-2:1989 and uses the same H, K and L structure. They are counterpart documents rather than interchangeable citations: the drawing should name the standard and edition that governs the contract.

Which characteristics does GB/T 1184 cover?

Its explicit tables cover straightness and flatness, perpendicularity, symmetry and circular run-out. The standard also gives rules for roundness and parallelism, including derivation from size or other general tolerances. This calculator provides only straightness and flatness. The standard does not provide a dedicated general value for every characteristic, so position, profile and similar requirements need explicit control when they matter.

Does GB/T 1184 replace GB/T 1804?

No. GB/T 1804 covers general tolerances for linear and angular dimensions; GB/T 1184 covers general geometrical tolerances. They are complementary and may both appear on the same drawing.

Does a general geometrical tolerance apply to a feature with a feature control frame?

An explicit feature control frame or individually indicated geometrical tolerance takes precedence for the geometrical characteristic it controls. General tolerances can still apply to other characteristics on the same feature when the drawing does not specify individual requirements for them.

Can GB/T 1184 be used for castings or additively manufactured parts?

The standard is mainly intended for features produced by material removal. It may be used for other processes if the manufacturer confirms the process can hold the standard's values. For castings, forgings or additive parts, check the drawing contract and process capability before relying on a general tolerance.

How do I choose H, K or L?

Base the choice on function, fit, inspection needs and process capability. H, K and L represent different levels of default geometrical accuracy; a tighter class is not automatically better if the process cannot hold it economically.

Why does the result show a zone rather than a plus-or-minus value?

Geometrical tolerances define a tolerance zone, not a symmetrical size deviation. The calculator returns the zone width for the selected characteristic and class; interpret it with the correct geometrical definition and datum scheme.