The engineering workbench / fits and machine elements
DIN 472 Internal Retaining Rings: Bore Groove Guide
Look up internal / bore circlip groove diameter, groove width, ring thickness, radial depth and edge distance. The available site tables are GB reference data; DIN 472 equivalence has not been verified.
Exact listed bore diameters: GB/T 893-2017 A (standard) 8–300 mm, B (heavy) 20–100 mm. No interpolation.
⌀26.2 × 1.3 groove d2 × m, mm · GB/T 893-2017 data; schematic, not to scale
02 / Read the limits
Results
Dimensions and deviations in mm. Verification notes apply to the displayed source.
| Characteristic | Result · mm | Interpretation |
|---|---|---|
| Nominal diameter | 25 mm | GB/T 893-2017; DIN equivalence NEEDS VERIFICATION. |
| Groove diameter d2 | 26.2 mm | Deviations +0.21 / 0 mm. |
| Groove width m | 1.3 mm | H13; deviations +0.14 / 0 mm. |
| Ring thickness | 1.2 mm | GB reference table, not a verified DIN value. |
| Radial groove depth | 0.6 mm | (d2 − d) / 2; calculated. |
| Tabulated groove depth t | 0.6 mm | Kept separate from the calculated nominal depth. |
| Minimum edge distance n | 1.8 mm | Source table minimum. |
| Ring diameter (source ring) | 26.9 mm | Source field retained; free/installed diameter definition NEEDS VERIFICATION. |
A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.
GB/T 893-2017 A — standard reference table
All dimensions and deviations are in mm. These are GB values; DIN equivalence NEEDS VERIFICATION.
| d | Groove d2 | d2 upper / lower | Width m | m upper / lower | Thickness | Minimum edge n | Verification |
|---|---|---|---|---|---|---|---|
| 8 | 8.4 | +0.09 / 0 | 0.9 | +0.14 / 0 | 0.8 | 0.6 | GB reference; DIN comparison pending |
| 9 | 9.4 | +0.09 / 0 | 0.9 | +0.14 / 0 | 0.8 | 0.6 | GB reference; DIN comparison pending |
| 10 | 10.4 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 0.6 | GB reference; DIN comparison pending |
| 11 | 11.4 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 0.6 | GB reference; DIN comparison pending |
| 12 | 12.5 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 0.8 | GB reference; DIN comparison pending |
| 13 | 13.6 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 0.9 | GB reference; DIN comparison pending |
| 14 | 14.6 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 0.9 | GB reference; DIN comparison pending |
| 15 | 15.7 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 1.1 | GB reference; DIN comparison pending |
| 16 | 16.8 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 1.2 | GB reference; DIN comparison pending |
| 17 | 17.8 | +0.11 / 0 | 1.1 | +0.14 / 0 | 1 | 1.2 | GB reference; DIN comparison pending |
| 18 | 19 | +0.13 / 0 | 1.1 | +0.14 / 0 | 1 | 1.5 | GB reference; DIN comparison pending |
| 19 | 20 | +0.13 / 0 | 1.1 | +0.14 / 0 | 1 | 1.5 | GB reference; DIN comparison pending |
| 20 | 21 | +0.13 / 0 | 1.1 | +0.14 / 0 | 1 | 1.5 | GB reference; DIN comparison pending |
| 21 | 22 | +0.13 / 0 | 1.1 | +0.14 / 0 | 1 | 1.5 | GB reference; DIN comparison pending |
| 22 | 23 | +0.13 / 0 | 1.1 | +0.14 / 0 | 1 | 1.5 | GB reference; DIN comparison pending |
| 24 | 25.2 | +0.21 / 0 | 1.3 | +0.14 / 0 | 1.2 | 1.8 | GB reference; DIN comparison pending |
| 25 | 26.2 | +0.21 / 0 | 1.3 | +0.14 / 0 | 1.2 | 1.8 | GB reference; DIN comparison pending |
| 26 | 27.2 | +0.21 / 0 | 1.3 | +0.14 / 0 | 1.2 | 1.8 | GB reference; DIN comparison pending |
| 28 | 29.4 | +0.21 / 0 | 1.3 | +0.14 / 0 | 1.2 | 2.1 | GB reference; DIN comparison pending |
| 30 | 31.4 | +0.25 / 0 | 1.3 | +0.14 / 0 | 1.2 | 2.1 | GB reference; DIN comparison pending |
| 31 | 32.7 | +0.25 / 0 | 1.3 | +0.14 / 0 | 1.2 | 2.6 | GB reference; DIN comparison pending |
| 32 | 33.7 | +0.25 / 0 | 1.3 | +0.14 / 0 | 1.2 | 2.6 | GB reference; DIN comparison pending |
| 34 | 35.7 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 2.6 | GB reference; DIN comparison pending |
| 35 | 37 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 3 | GB reference; DIN comparison pending |
| 36 | 38 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 3 | GB reference; DIN comparison pending |
| 37 | 39 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 3 | GB reference; DIN comparison pending |
| 38 | 40 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 3 | GB reference; DIN comparison pending |
| 40 | 42.5 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3.8 | GB reference; DIN comparison pending |
| 42 | 44.5 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3.8 | GB reference; DIN comparison pending |
| 45 | 47.5 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3.8 | GB reference; DIN comparison pending |
| 47 | 49.5 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3.8 | GB reference; DIN comparison pending |
| 48 | 50.5 | +0.3 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3.8 | GB reference; DIN comparison pending |
| 50 | 53 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 52 | 55 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 55 | 58 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 56 | 59 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 58 | 61 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 60 | 63 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 62 | 65 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 63 | 66 | +0.3 / 0 | 2.15 | +0.14 / 0 | 2 | 4.5 | GB reference; DIN comparison pending |
| 65 | 68 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 68 | 71 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 70 | 73 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 72 | 75 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 75 | 78 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 78 | 81 | +0.35 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 80 | 83.5 | +0.35 / 0 | 2.65 | +0.14 / 0 | 2.5 | 5.3 | GB reference; DIN comparison pending |
| 82 | 85.5 | +0.35 / 0 | 2.65 | +0.14 / 0 | 2.5 | 5.3 | GB reference; DIN comparison pending |
| 85 | 88.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 88 | 91.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 90 | 93.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 92 | 95.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 95 | 98.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 98 | 101.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 100 | 103.5 | +0.35 / 0 | 3.15 | +0.18 / 0 | 3 | 5.3 | GB reference; DIN comparison pending |
| 102 | 106 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 105 | 109 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 108 | 112 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 110 | 114 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 112 | 116 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 115 | 119 | +0.54 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 120 | 124 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 125 | 129 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 130 | 134 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 135 | 139 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 140 | 144 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 145 | 149 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 6 | GB reference; DIN comparison pending |
| 150 | 155 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 155 | 160 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 160 | 165 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 165 | 170 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 170 | 175 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 175 | 180 | +0.63 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 180 | 185 | +0.72 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 185 | 190 | +0.72 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 190 | 195 | +0.72 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 195 | 200 | +0.72 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 200 | 205 | +0.72 / 0 | 4.15 | +0.18 / 0 | 4 | 7.5 | GB reference; DIN comparison pending |
| 210 | 216 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 9 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 220 | 226 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 9 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 230 | 236 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 9 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 240 | 246 | Not tabulated / Not tabulated | 4.15 | +0.18 / 0 | 5 | 9 | NEEDS VERIFICATION: ring thickness exceeds groove width |
| 250 | 256 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 9 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 260 | 268 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 12 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 270 | 278 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 12 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 280 | 288 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 12 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 290 | 298 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 12 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
| 300 | 308 | Not tabulated / Not tabulated | 5.15 | +0.18 / 0 | 5 | 12 | NEEDS VERIFICATION: groove diameter deviations not tabulated |
GB/T 893-2017 B — heavy reference table
All dimensions and deviations are in mm. These are GB values; DIN equivalence NEEDS VERIFICATION.
| d | Groove d2 | d2 upper / lower | Width m | m upper / lower | Thickness | Minimum edge n | Verification |
|---|---|---|---|---|---|---|---|
| 20 | 21 | +0.13 / 0 | 1.6 | +0.14 / 0 | 1.5 | 1.5 | GB reference; DIN comparison pending |
| 22 | 23 | +0.13 / 0 | 1.6 | +0.14 / 0 | 1.5 | 1.5 | GB reference; DIN comparison pending |
| 24 | 25.2 | +0.21 / 0 | 1.6 | +0.14 / 0 | 1.5 | 1.8 | GB reference; DIN comparison pending |
| 25 | 26.2 | +0.21 / 0 | 1.6 | +0.14 / 0 | 1.5 | 1.8 | GB reference; DIN comparison pending |
| 26 | 27.2 | +0.21 / 0 | 1.6 | +0.14 / 0 | 1.5 | 1.8 | GB reference; DIN comparison pending |
| 28 | 29.4 | +0.21 / 0 | 1.6 | +0.14 / 0 | 1.5 | 2.1 | GB reference; DIN comparison pending |
| 30 | 31.4 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 2.1 | GB reference; DIN comparison pending |
| 32 | 33.7 | +0.25 / 0 | 1.6 | +0.14 / 0 | 1.5 | 2.6 | GB reference; DIN comparison pending |
| 34 | 35.7 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 2.6 | GB reference; DIN comparison pending |
| 35 | 37 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3 | GB reference; DIN comparison pending |
| 37 | 39 | +0.25 / 0 | 1.85 | +0.14 / 0 | 1.75 | 3 | GB reference; DIN comparison pending |
| 38 | 40 | +0.25 / 0 | 1.85 | +0.14 / 0 | 2 | 3 | NEEDS VERIFICATION: ring thickness exceeds groove width |
| 40 | 42.5 | +0.25 / 0 | 2.15 | +0.14 / 0 | 2 | 3.8 | GB reference; DIN comparison pending |
| 42 | 44.5 | +0.25 / 0 | 2.15 | +0.14 / 0 | 2 | 3.8 | GB reference; DIN comparison pending |
| 45 | 47.5 | +0.25 / 0 | 2.15 | +0.14 / 0 | 2 | 3.8 | GB reference; DIN comparison pending |
| 47 | 49.5 | +0.25 / 0 | 2.15 | +0.14 / 0 | 2 | 3.8 | GB reference; DIN comparison pending |
| 50 | 53 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 52 | 55 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 55 | 58 | +0.3 / 0 | 2.65 | +0.14 / 0 | 2.5 | 4.5 | GB reference; DIN comparison pending |
| 60 | 63 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 62 | 65 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 65 | 68 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 68 | 71 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 70 | 73 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 72 | 75 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 75 | 78 | +0.3 / 0 | 3.15 | +0.18 / 0 | 3 | 4.5 | GB reference; DIN comparison pending |
| 80 | 83.5 | +0.35 / 0 | 4.15 | +0.18 / 0 | 4 | 5.3 | GB reference; DIN comparison pending |
| 85 | 88.5 | +0.35 / 0 | 4.15 | +0.18 / 0 | 4 | 5.3 | GB reference; DIN comparison pending |
| 90 | 93.5 | +0.35 / 0 | 4.15 | +0.18 / 0 | 4 | 5.3 | GB reference; DIN comparison pending |
| 95 | 98.5 | +0.35 / 0 | 4.15 | +0.18 / 0 | 4 | 5.3 | GB reference; DIN comparison pending |
| 100 | 103.5 | +0.35 / 0 | 4.15 | +0.18 / 0 | 4 | 5.3 | GB reference; DIN comparison pending |
03 / How to use
How to use this calculator
- This calculator shows GB/T 893-2017 bore-groove reference dimensions from the site's Chinese tool. DIN 472 values are to be verified; check a DIN 472 table or the ring maker's catalogue before machining.
- Enter the nominal bore diameter from the drawing. Only exact listed sizes are accepted; there is no interpolation.
- Choose ring type A (standard) or B (heavy) in the GB/T 893 ring-type selector.
- Read the ring and internal-groove values from the result, including the groove dimensions and ring size.
- Check the drawing for groove position, ring orientation, material and any individual requirement before machining or assembly.
Table lookup, with explicit boundaries
Calculated nominal groove depth = (d2 − d) / 2.
Groove diameter and width limits = nominal value + its listed deviation.
Circlip sizes are discrete catalogue entries, not continuous intervals. An unlisted input is rejected. A gap in the list does not license interpolation. Missing source fields remain “Not tabulated”.
04 / Engineering context
DIN 472 Internal Retaining Rings: Circlips for Bores
DIN 472 covers internal retaining rings, often called circlips, for bores and housings. The ring is compressed, inserted into the bore and allowed to expand into a circumferential groove. Its inward-projecting portion forms a removable shoulder that can locate a bearing, seal, plug, collar or similar component. It provides axial retention; it is not a torque-transmitting coupling.
The groove is machined inside the bore and is a different feature from an external shaft groove. Its diameter, width, profile and position relative to the housing face must match the ring. The ring has to pass through the bore while compressed and then open fully into the groove. If the groove is poorly formed or the ring does not seat, the assembly may not hold its intended position. Follow the named standard and the drawing rather than sizing the groove by eye.
On this page, the calculator looks up the site's GB/T 893-2017 reference ring and bore-groove data for an exact listed bore diameter; DIN 472 dimensions have not been verified against that table and are to be verified. The result includes the groove diameter and width with their deviations, the ring thickness, the radial groove depth and the minimum edge distance. Use the result with the specified ring type and installation direction. The reference tables below list the GB/T 893-2017 values; DIN 472 ring and groove sizes are not reproduced because they have not been verified.
GB / DIN comparison status
| Reference | Status |
|---|---|
| GB/T 893-2017, A/B | Committed Chinese site data used for the reference calculator. |
| GB/T 893-2017 | Both A and B source datasets are retained. |
| DIN 472 | NEEDS VERIFICATION: independent dimensions, tolerances and interchangeability are not provided by the site. |
Source: Chinese retaining-ring tool. Missing load ratings are not filled; this calculator performs no load-capacity selection.
06 / Questions
Frequently asked questions
What is DIN 472?
DIN 472 is the German standard for internal retaining rings, or circlips, used in bores and housings. The ring sits in a groove inside the bore and leaves an inward-facing shoulder that retains a component. It is a removable axial locator rather than a machined structural shoulder.
Where is the groove for a DIN 472 ring?
The groove is cut into the wall of the bore, usually near the housing face or the shoulder that locates the retained part. The ring is compressed to enter the bore, then expands into the groove. Its diameter, width, profile and axial position are all part of the retaining-ring design.
What does the calculator look up for DIN 472?
It looks up GB/T 893-2017 reference ring and bore-groove values for the exact listed bore diameter you enter; DIN 472 equivalence is to be verified. The result identifies the applicable ring size and gives the groove data needed to machine and check the housing. Read the labels in the calculator result, since the exact fields depend on the tool version.
How does DIN 472 differ from DIN 471?
DIN 472 is an internal ring for a bore: it expands into a groove inside the housing and protrudes inward. DIN 471 is an external ring for a shaft: it contracts into a groove on the shaft and protrudes outward. The groove geometry, ring orientation and fitting direction differ, so the two are not interchangeable.
Does a DIN 472 ring transmit torque?
No. DIN 472 is intended for axial retention. It may resist axial load up to the capacity of the ring and groove, but it is not a torque-transmitting device. A hub that must transmit torque needs a key, spline, interference fit or another designed load path.
Can a DIN 472 ring be reused?
Reuse depends on the ring material, deformation during removal, corrosion and the manufacturer's guidance. A ring that has been over-compressed, bent or damaged should be replaced. For critical assemblies, use a new ring and confirm that it expands fully into the groove.
How is a DIN 472 ring installed and removed?
The ring is compressed with suitable retaining-ring pliers, inserted into the bore, and released so that it expands into the groove. Removal reverses the process. Use tools that engage the lugs without distorting the ring, protect the bore surface, and follow the manufacturer's instructions for the specific ring.
Does bore diameter alone define the complete DIN 472 joint?
No. The bore diameter selects the standard ring and groove size, but the joint also depends on groove form, ring type, housing material, axial load, retained component and assembly method. Confirm the full callout and inspect the groove before fitting the ring. The calculator provides the dimensional lookup, not a validation of the complete design.