EngineeringFits中文 / Chinese version ↗

The engineering workbench / fits and machine elements

40 mm Shaft Keyway: Parallel Key and Keyway Dimensions

Find parallel key b × h, shaft groove depth t1, hub groove depth t2, groove-width deviations and the dimensions d − t1 and d + t2 for a 40 mm shaft.

GB/T 1095-2003 dimensions from the committed Chinese tool, shaft diameters 6–500 mm. DIN 6885-1 / ISO R773 comparison is pending; no interchangeable dimensions are asserted.

SECTION · GB/T 1095-2003⌀40 mm shaft
Parallel key and keyway section for a 40 mm shaftCross-section through a 40 mm shaft and its hub with a 12 by 8 mm parallel key. The key width b is 12 mm, the shaft keyway depth t1 is 5 mm and the hub keyway depth t2 is 3.3 mm, from the GB/T 1095-2003 table used by this page. Proportions follow these values.b = 12t2 = 3.3t1 = 5⌀d = 40HubShaft

12 × 8 key b × h, mm · GB/T 1095-2003 data; DIN 6885-1 to be verified

02 / Read the limits

Results

Dimensions and deviations in mm. Verification notes apply to the displayed source.

CharacteristicResult · mmInterpretation
Key b × h12 × 8 mmNominal parallel-key section.
Shaft groove depth t15 mmDepth allowance +0.2 / 0 mm in the source.
Hub groove depth t23.3 mmDepth allowance +0.2 / 0 mm in the source.
Shaft dimension d − t135 mmDeviation 0 / −0.2 mm on this dimension.
Hub dimension d + t243.3 mmDeviation +0.2 / 0 mm on this dimension.
Shaft groove width N90 / -0.043 mmUpper / lower deviations from nominal b.
Hub groove width JS9+0.0215 / -0.0215 mmUpper / lower deviations from nominal b.
Groove root radius0.25–0.4 mmTabulated minimum–maximum.

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

Parallel key and groove dimensions

Shaft d · mm (upper inclusive)Key b × h · mmt1 · mmt2 · mmDepth allowances t1 / t2 · mmRoot radius · mm
≥6 to ≤82 × 21.21+0.1/0; +0.1/00.08–0.16
>8 to ≤103 × 31.81.4+0.1/0; +0.1/00.08–0.16
>10 to ≤124 × 42.51.8+0.1/0; +0.1/00.16–0.25
>12 to ≤175 × 532.3+0.1/0; +0.1/00.16–0.25
>17 to ≤226 × 63.52.8+0.1/0; +0.1/00.16–0.25
>22 to ≤308 × 743.3+0.2/0; +0.2/00.25–0.4
>30 to ≤3810 × 853.3+0.2/0; +0.2/00.25–0.4
>38 to ≤4412 × 853.3+0.2/0; +0.2/00.25–0.4
>44 to ≤5014 × 95.53.8+0.2/0; +0.2/00.25–0.4
>50 to ≤5816 × 1064.3+0.2/0; +0.2/00.25–0.4
>58 to ≤6518 × 1174.4+0.2/0; +0.2/00.25–0.4
>65 to ≤7520 × 127.54.9+0.2/0; +0.2/00.4–0.6
>75 to ≤8522 × 1495.4+0.2/0; +0.2/00.4–0.6
>85 to ≤9525 × 1495.4+0.2/0; +0.2/00.4–0.6
>95 to ≤11028 × 16106.4+0.2/0; +0.2/00.4–0.6
>110 to ≤13032 × 18117.4+0.3/0; +0.3/00.7–1
>130 to ≤15036 × 20128.4+0.3/0; +0.3/00.7–1
>150 to ≤17040 × 22139.4+0.3/0; +0.3/00.7–1
>170 to ≤20045 × 251510.4+0.3/0; +0.3/00.7–1
>200 to ≤23050 × 281711.4+0.3/0; +0.3/00.7–1
>230 to ≤26056 × 322012.4+0.3/0; +0.3/01.2–1.6
>260 to ≤29063 × 322012.4+0.3/0; +0.3/01.2–1.6
>290 to ≤33070 × 362214.4+0.3/0; +0.3/01.2–1.6
>330 to ≤38080 × 402515.4+0.3/0; +0.3/02–2.5
>380 to ≤44090 × 452817.4+0.3/0; +0.3/02–2.5
>440 to ≤500100 × 503119.5+0.3/0; +0.3/02–2.5

Groove-width deviations

All entries are upper / lower deviations in mm from nominal key width b. This is the groove width, not the key’s own width tolerance.

b · mmH9D10N9JS9P9
2+0.025 / 0+0.06 / +0.02-0.004 / -0.029+0.0125 / -0.0125-0.006 / -0.031
3+0.025 / 0+0.06 / +0.02-0.004 / -0.029+0.0125 / -0.0125-0.006 / -0.031
4+0.03 / 0+0.078 / +0.030 / -0.03+0.015 / -0.015-0.012 / -0.042
5+0.03 / 0+0.078 / +0.030 / -0.03+0.015 / -0.015-0.012 / -0.042
6+0.03 / 0+0.078 / +0.030 / -0.03+0.015 / -0.015-0.012 / -0.042
8+0.036 / 0+0.098 / +0.040 / -0.036+0.018 / -0.018-0.015 / -0.051
10+0.036 / 0+0.098 / +0.040 / -0.036+0.018 / -0.018-0.015 / -0.051
12+0.043 / 0+0.12 / +0.050 / -0.043+0.0215 / -0.0215-0.018 / -0.061
14+0.043 / 0+0.12 / +0.050 / -0.043+0.0215 / -0.0215-0.018 / -0.061
16+0.043 / 0+0.12 / +0.050 / -0.043+0.0215 / -0.0215-0.018 / -0.061
18+0.043 / 0+0.12 / +0.050 / -0.043+0.0215 / -0.0215-0.018 / -0.061
20+0.052 / 0+0.149 / +0.0650 / -0.052+0.026 / -0.026-0.022 / -0.074
22+0.052 / 0+0.149 / +0.0650 / -0.052+0.026 / -0.026-0.022 / -0.074
25+0.052 / 0+0.149 / +0.0650 / -0.052+0.026 / -0.026-0.022 / -0.074
28+0.052 / 0+0.149 / +0.0650 / -0.052+0.026 / -0.026-0.022 / -0.074
32+0.062 / 0+0.18 / +0.080 / -0.062+0.031 / -0.031-0.026 / -0.088
36+0.062 / 0+0.18 / +0.080 / -0.062+0.031 / -0.031-0.026 / -0.088
40+0.062 / 0+0.18 / +0.080 / -0.062+0.031 / -0.031-0.026 / -0.088
45+0.062 / 0+0.18 / +0.080 / -0.062+0.031 / -0.031-0.026 / -0.088
50+0.062 / 0+0.18 / +0.080 / -0.062+0.031 / -0.031-0.026 / -0.088
56+0.074 / 0+0.22 / +0.10 / -0.074+0.037 / -0.037-0.032 / -0.106
63+0.074 / 0+0.22 / +0.10 / -0.074+0.037 / -0.037-0.032 / -0.106
70+0.074 / 0+0.22 / +0.10 / -0.074+0.037 / -0.037-0.032 / -0.106
80+0.087 / 0+0.26 / +0.120 / -0.087+0.0435 / -0.0435-0.037 / -0.124
90+0.087 / 0+0.26 / +0.120 / -0.087+0.0435 / -0.0435-0.037 / -0.124
100+0.087 / 0+0.26 / +0.120 / -0.087+0.0435 / -0.0435-0.037 / -0.124

03 / How to use

How to use this calculator

  1. This calculator uses the GB/T 1095-2003 keyway table from the site's Chinese tool. DIN 6885-1 and ISO/R 773 values have not been verified against it, so confirm the standard named on the drawing first.
  2. Enter 40 mm as the nominal shaft diameter.
  3. Choose the connection (loose, normal or tight); it sets the shaft and hub groove-width tolerance codes.
  4. Read the key cross-section, shaft keyway, hub keyway and tolerance values from the result.
  5. Review any individual drawing notes on fit, key length, material or inspection before cutting the keyway.

Table lookup, with explicit boundaries

Select the shaft-diameter interval → read b, h, t1 and t2.
Shaft dimension = d − t1, with deviation 0 / −t1 allowance.
Hub dimension = d + t2, with deviation +t2 allowance / 0.
Groove-width deviations apply to nominal b, not shaft diameter d.

The source accepts 6 mm in its first interval (6–8 mm). Following intervals exclude the lower endpoint and include the upper endpoint. In particular, 30 mm uses the >22–30 mm row. Inputs outside 6–500 mm are rejected.

04 / Engineering context

Keyway for a 40 mm Shaft: Parallel Key and Keyway Dimensions

A 40 mm shaft appears on industrial machinery where a compact drive has to carry a substantial torque: conveyor reducers, larger pumps, mixers and general transmission assemblies. The keyway is a load path as well as a locating feature, so its dimensions should come from the governing standard rather than from a visual match with an old key.

The keyway removes material from the shaft and introduces edges at the slot corners. Under steady torque that may be tolerable, but under shock, reversing duty or a poor hub fit the same feature can become a fatigue initiation point. Key length and contact conditions also affect bearing pressure. The standard lookup gives the section geometry; the engineer still has to confirm that the shaft, hub and key can carry the intended load.

DIN 6885, ISO/R 773 and GB/T 1095 provide related but separate lookup systems. Confirm which standard and edition the drawing cites before machining. The exact key width, height, keyway depths and tolerances for a 40 mm shaft are shown in the on-page calculator result. This page does not guess those values, and it does not treat a value from a 30 mm or 50 mm shaft as a substitute.

GB / DIN / ISO comparison status

StandardData used / status
GB/T 1095-2003Committed /keyway/ dimensions and width-tolerance values.
DIN 6885-1NEEDS VERIFICATION: no independent DIN table in the site dataset.
ISO R773NEEDS VERIFICATION: dimensional relationship and edition must be checked.

No numerical DIN-versus-GB differences are inferred. Source: Chinese GB/T 1095 tool.

06 / Questions

Frequently asked questions

What keyway size does a 40 mm shaft need?

The keyway size is the table entry for a 40 mm nominal shaft in the GB/T 1095 table used here. It is not a universal figure across DIN, ISO and GB documents or across key types. Confirm the drawing's standard, enter 40 mm in the calculator, and use the dimensions shown for that result.

What key width and height fit a 40 mm shaft?

The calculator returns the nominal key width and height for a 40 mm shaft in the GB/T 1095 table used here. Do not reuse a key from a smaller shaft or assume that a larger shaft uses a proportionally larger key. Read the result and confirm that the key type matches the drawing.

How deep is the keyway on a 40 mm shaft?

Shaft and hub keyway depths are part of the standard lookup and are shown by the calculator for a 40 mm shaft. They are not repeated here because the values depend on the standard and key type; this calculator shows GB/T 1095 values only. For a 40 mm shaft carrying high or reversing load, assess the stress concentration at the keyway rather than treating depth as a purely dimensional choice.

How long should the keyway be on a 40 mm shaft?

Key length should follow the hub length, torque, permissible bearing pressure and key material. The 40 mm diameter alone does not determine it. Use the drawing length or carry out a separate design check. A key that is too short can overload its side faces, while an unnecessarily long keyway can weaken the shaft.

Are DIN 6885, ISO/R 773 and GB/T 1095 interchangeable for a 40 mm shaft?

They are related systems, but each is a separate document with its own edition and tolerance details. The Chinese national standards catalogue (SAMR) lists GB/T 1095-2003 as a non-equivalent (NEQ) adoption of ASME B18.25.1M:1996; any relationship to ISO/R 773 is to be verified, and separate editions can still differ in detail. Do not mix values from different standards simply because the nominal key sizes look similar.

Can a 40 mm shaft keyway handle shock loads?

There is no general yes or no. Shock capacity depends on the shaft and key materials, heat treatment, keyway geometry, fit, key length, hub stiffness, load direction and the number of cycles. The keyway is a stress raiser, so a shock-loaded or reversing application needs an engineering check. The calculator supplies dimensions, not a fatigue or torque rating.

What about the hub keyway for a 40 mm shaft?

It is part of the same lookup and must match the key and the shaft keyway. An undersize hub keyway can prevent proper seating, while an oversize one can reduce contact and allow movement. Read both the shaft and hub values from the 40 mm result, and inspect the hub for distortion or wear before assembly.