The engineering workbench / fits and machine elements
ISO 286 H7 Hole Tolerance: The Common Hole Basis
Look up H7 hole upper and lower deviations in micrometres, plus minimum and maximum sizes in millimetres. Values reuse the existing English ISO 286 dataset.
Table intervals cover nominal sizes greater than 0 and up to 500 mm. The existing English calculator supports 1–500 mm; results below 1 mm require verification.
02 / Read the limits
Results
Deviations in µm; nominal and limit sizes in mm.
| Characteristic | Result · µm / mm | Interpretation |
|---|---|---|
| Nominal size | 25 mm | English ISO 286 dataset. |
| Upper deviation | +21 µm | Hole ES / shaft es. |
| Lower deviation | 0 µm | Hole EI / shaft ei. |
| Minimum size | 25 mm | Nominal + lower deviation / 1000. |
| Maximum size | 25.021 mm | Nominal + upper deviation / 1000. |
A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.
H7 hole size-range table
| Nominal size > lower to ≤ upper · mm | Upper deviation · µm | Lower deviation · µm | Verification note |
|---|---|---|---|
| >0 to ≤3 | +10 | 0 | Below 1 mm NEEDS VERIFICATION |
| >3 to ≤6 | +12 | 0 | English dataset |
| >6 to ≤10 | +15 | 0 | English dataset |
| >10 to ≤18 | +18 | 0 | English dataset |
| >18 to ≤30 | +21 | 0 | English dataset |
| >30 to ≤50 | +25 | 0 | English dataset |
| >50 to ≤80 | +30 | 0 | English dataset |
| >80 to ≤120 | +35 | 0 | English dataset |
| >120 to ≤180 | +40 | 0 | English dataset |
| >180 to ≤250 | +46 | 0 | English dataset |
| >250 to ≤315 | +52 | 0 | English dataset |
| >315 to ≤400 | +57 | 0 | English dataset |
| >400 to ≤500 | +63 | 0 | English dataset |
03 / How to use
How to use this calculator
- This page looks up the ISO 286 H7 hole class. Enter the nominal size of the hole in the field below; the class is already fixed for this page.
- Read the upper and lower limit deviations and the resulting limits. For an H hole, the lower limit should coincide with the nominal size.
- The size-range table on this page lists the same deviations for every tabulated band.
- To evaluate a fit with a mating shaft such as g6, h6, js6, k6 or p6, open the ISO 286 fit calculator and select both classes there. This page shows the H7 hole limits only.
- Use the result for that nominal size only; the tabulated limits change between size bands.
Table lookup, with explicit boundaries
Minimum size = nominal + lower deviation / 1000.
Maximum size = nominal + upper deviation / 1000.
Deviations: µm; sizes: mm.
The first interval includes its lower tabulated size. Each following interval excludes its lower endpoint and includes its upper endpoint. The calculator rejects inputs outside the stated range and does not round inputs across a boundary.
04 / Engineering context
ISO 286 H7 Hole Tolerance Class: The Common Hole Basis
An H7 hole is a hole tolerance class in ISO 286. The capital H places the lower limit of the hole at the nominal size, so the entire tolerance interval lies at or above that size. The 7 is the IT7 grade. H7 is one of the most widely used H hole classes in the hole-basis fit system, which is why it appears so often on assembly drawings: one H7 hole can be paired with different shaft classes to create clearance, transition or interference.
The shaft class determines the fit. H7/g6 is a close running clearance fit, H7/h6 is a locational clearance fit, H7/js6 and H7/k6 are transition fits, and H7/p6 is commonly an interference or press fit. These labels describe the usual intent; the actual clearance or interference at a given nominal size must come from the tabulated limits. H7 by itself does not guarantee any one of those conditions, because a different shaft can change the result completely.
H7 is a size tolerance, not a complete manufacturing specification. It does not control cylindricity, straightness, position or surface roughness, and it does not tell the shop which process to use. A hole can be within its H7 size limits and still be unsuitable for a precision fit if its form or surface finish is poor. Add those requirements where the function needs them.
ISO 286 data source
Numerical source: existing ISO 286 JSON, with the h/H, js, f/g and k/p rules in the existing engine. Dataset edition label: ISO 286-1:2010 / ISO 286-2:2010. This lookup adds no new fundamental-deviation formula.
06 / Questions
Frequently asked questions
What does H7 mean?
The H is a hole fundamental deviation whose lower limit is at the nominal size. The 7 is the IT7 standard tolerance grade and determines the width of the hole zone. Together they define the H7 hole class.
Why is H7 so common?
H7 is one of the most common H hole classes used in the hole-basis system. Keeping the hole at H allows one hole class to be paired with a range of shaft classes, so the required clearance or interference can be changed by changing the shaft rather than the hole.
Which shafts are typically used with H7?
Common pairings include g6 for a close running clearance, h6 for a locational clearance, js6 and k6 for transition fits, and p6 for a common interference or press fit. These are typical intentions, not guarantees; read the calculated limits for the nominal size in use.
Is H7 always a clearance fit?
No. H7 describes the hole only. With a clearance shaft it can give clearance, with a shaft near the nominal size it can give a transition fit, and with a sufficiently large shaft it can give interference. The mating shaft class decides the fit family.
Is H7 the same as a hole-basis fit?
No. H7 is a tolerance class. A hole-basis fit is a system in which the holes in the fit use the H fundamental deviation and the shaft is varied. H7 is the most common H hole grade, but the two terms are not interchangeable.
Does H7 require reaming?
No. A tolerance class does not prescribe a process. Reaming, boring, honing, turning or another method may be capable of H7 depending on the material, size, geometry and production equipment. The drawing specifies the limits, not the machine.
Does H7 control position, roundness or surface finish?
No. H7 controls size. Position, orientation, roundness, cylindricity and surface texture are separate characteristics and need their own specifications when they matter to assembly or function.
Why do the limits change with size?
The H7 limit deviations depend on the nominal size and are tabulated in ISO 286-2. This page lists those values in the size-range table, and the calculator applies the class to the size you enter so the result matches the correct size band.