The engineering workbench / fits and machine elements
ISO 286 H8 Hole Tolerance: Clearance Fit Basics
Look up H8 hole upper and lower deviations in micrometres, plus minimum and maximum sizes in millimetres. Values reuse the existing English ISO 286 dataset.
Table intervals cover nominal sizes greater than 0 and up to 500 mm. The existing English calculator supports 1–500 mm; results below 1 mm require verification.
02 / Read the limits
Results
Deviations in µm; nominal and limit sizes in mm.
| Characteristic | Result · µm / mm | Interpretation |
|---|---|---|
| Nominal size | 25 mm | English ISO 286 dataset. |
| Upper deviation | +33 µm | Hole ES / shaft es. |
| Lower deviation | 0 µm | Hole EI / shaft ei. |
| Minimum size | 25 mm | Nominal + lower deviation / 1000. |
| Maximum size | 25.033 mm | Nominal + upper deviation / 1000. |
A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.
H8 hole size-range table
| Nominal size > lower to ≤ upper · mm | Upper deviation · µm | Lower deviation · µm | Verification note |
|---|---|---|---|
| >0 to ≤3 | +14 | 0 | Below 1 mm NEEDS VERIFICATION |
| >3 to ≤6 | +18 | 0 | English dataset |
| >6 to ≤10 | +22 | 0 | English dataset |
| >10 to ≤18 | +27 | 0 | English dataset |
| >18 to ≤30 | +33 | 0 | English dataset |
| >30 to ≤50 | +39 | 0 | English dataset |
| >50 to ≤80 | +46 | 0 | English dataset |
| >80 to ≤120 | +54 | 0 | English dataset |
| >120 to ≤180 | +63 | 0 | English dataset |
| >180 to ≤250 | +72 | 0 | English dataset |
| >250 to ≤315 | +81 | 0 | English dataset |
| >315 to ≤400 | +89 | 0 | English dataset |
| >400 to ≤500 | +97 | 0 | English dataset |
03 / How to use
How to use this calculator
- This page looks up the ISO 286 H8 hole class. Enter the nominal size of the hole in the field below; the class is already fixed for this page.
- Read the upper and lower limit deviations and the resulting limits. For an H hole, the lower limit should coincide with the nominal size.
- The size-range table on this page lists the same deviations for every tabulated band.
- To evaluate the common pairing with an f7 shaft, open the ISO 286 fit calculator and select H8 and f7 there. This page shows the H8 hole limits only.
- Use the result for that nominal size only; the tabulated limits change between size bands.
Table lookup, with explicit boundaries
Minimum size = nominal + lower deviation / 1000.
Maximum size = nominal + upper deviation / 1000.
Deviations: µm; sizes: mm.
The first interval includes its lower tabulated size. Each following interval excludes its lower endpoint and includes its upper endpoint. The calculator rejects inputs outside the stated range and does not round inputs across a boundary.
04 / Engineering context
ISO 286 H8 Hole Tolerance Class: Clearance Fits
An H8 hole is a hole tolerance class in ISO 286. The capital H places the hole's lower limit at the nominal size, and the 8 is the IT8 grade. The tolerance interval is wider than H7 for the same nominal size, so H8 allows a wider manufacturing band and more variation in the assembly. It is a general-purpose hole class, often chosen for clearance fits and for parts that do not need the tighter control of H7.
H8/f7 is a common clearance or running fit. The H8 hole starts at the nominal size and the f7 shaft sits below it, so the pair remains clear throughout the limits. H8 can also be paired with other shafts when the application calls for more or less clearance; the resulting fit family depends on the shaft letter and grade. As with every ISO 286 class, the actual clearance comes from the nominal size and the tabulated deviations, not from the class label alone.
H8 is a size class. It does not set form, orientation, position or surface texture, and it does not choose the manufacturing process. A wider tolerance can be an advantage for cost, but it also means more variation in the fit; check the extreme clearances for the function, especially where alignment or lubrication is critical.
ISO 286 data source
Numerical source: existing ISO 286 JSON, with the h/H, js, f/g and k/p rules in the existing engine. Dataset edition label: ISO 286-1:2010 / ISO 286-2:2010. This lookup adds no new fundamental-deviation formula.
06 / Questions
Frequently asked questions
What does H8 mean?
The H is a hole fundamental deviation whose lower limit is at the nominal size. The 8 is the IT8 standard tolerance grade and sets the width of the hole zone. Together they define the H8 hole class.
How does H8 differ from H7?
Both are H holes with their lower limit at the nominal size, but H8 uses the wider IT8 grade while H7 uses IT7. H8 therefore permits more size variation and generally gives a looser or less tightly controlled fit than H7.
What shaft is commonly used with H8?
H8/f7 is a common clearance or running fit. The H8 hole provides the wider hole band and the f7 shaft sits below the nominal size, so the pair has clearance. Other shaft classes can be used when the design needs a different fit.
Is H8 always a clearance fit?
No. H8 describes the hole only. With an f7 shaft it is a clearance fit, but a shaft whose limits sit above the hole, such as a p6 shaft, can produce interference. The mating shaft class decides the fit family.
Can H8 be used for bearing housings?
Some bearing housings use H8 or a related class, but bearing manufacturers publish specific housing and shaft fits for each bearing type, load direction and operating condition. Follow the bearing catalogue and application data rather than selecting H8 from the class name alone.
Does H8 control surface finish or roundness?
No. H8 limits the size of the hole. Surface texture, roundness, cylindricity and position are separate requirements and need their own specifications when they affect the function.
Why would I choose H8 instead of H7?
H8 allows a wider hole tolerance, which can reduce manufacturing cost and suit a clearance application where more variation is acceptable. The trade-off is a larger change in clearance across the tolerance band, so check both extremes before choosing it.
Why does the calculator ask for the nominal size?
The H8 limit deviations and the IT8 width are tabulated by nominal-size band. Entering the size lets the calculator select the correct band and return the applicable limits and fit range.