EngineeringFitsEnglish tool

The engineering workbench / fits and machine elements

M16 × 2 Tap Drill: Core Hole for Metric Coarse Thread

Estimate a cutting-tap drill as nominal thread diameter D minus pitch P. Compare that estimate with provisional manufacturer chart drills for selected metric coarse and fine threads.

Selected candidate ISO 261/262 metric pitch series only. Pitch assignments, chart drill sizes and all minor-diameter limits NEEDS VERIFICATION. Forming taps are outside this calculator.

ISO BASIC PROFILEM16 × 2
M16 × 2 internal thread profile with tap drillAxial section of an M16 × 2 internal thread drawn to ISO 68-1 basic-profile proportions. Major diameter D 16 mm; basic minor diameter D1 = D − 1.0825 P ≈ 13.835 mm; provisional chart tap drill 14 mm, shown dashed. Chart drill and minor-diameter values are to be verified.⌀D1 ≈ 13.835 basic minor⌀D = 16 majortap drill ⌀14*Pitch P = 2 · internal thread, axial section

14 mm D − P estimate · *chart drill 14 mm, provisional, to be verified

02 / Read the limits

Results

Dimensions and deviations in mm. Verification notes apply to the displayed source.

CharacteristicResult · mmInterpretation
Thread D × P16 × 2 mmcoarse; pitch series NEEDS VERIFICATION against ISO 261/262.
Cutting-tap estimate D − P14 mmApproximation; excludes forming taps.
Provisional chart drill14 mmNEEDS VERIFICATION against ISO 2306 / DIN 336; manufacturer-specific.
Minor-diameter limitsNEEDS VERIFICATIONNot supplied; no tolerance class or limits inferred from D − P.

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

Selected coarse and fine pitch table — NEEDS VERIFICATION

ThreadSeriesPitch · mmD − P estimate · mmProvisional chart drill · mmMinor limits / status
M3 × 0.5coarse0.52.52.5Unavailable — NEEDS VERIFICATION
M4 × 0.7coarse0.73.33.3Unavailable — NEEDS VERIFICATION
M5 × 0.8coarse0.84.24.2Unavailable — NEEDS VERIFICATION
M6 × 1coarse155Unavailable — NEEDS VERIFICATION
M8 × 1.25coarse1.256.756.8Unavailable — NEEDS VERIFICATION
M10 × 1.25fine1.258.758.7Unavailable — NEEDS VERIFICATION
M10 × 1.5coarse1.58.58.5Unavailable — NEEDS VERIFICATION
M12 × 1.25fine1.2510.7510.8Unavailable — NEEDS VERIFICATION
M12 × 1.75coarse1.7510.2510.2Unavailable — NEEDS VERIFICATION
M16 × 1.5fine1.514.514.5Unavailable — NEEDS VERIFICATION
M16 × 2coarse21414Unavailable — NEEDS VERIFICATION
M20 × 1.5fine1.518.518.5Unavailable — NEEDS VERIFICATION
M20 × 2.5coarse2.517.517.5Unavailable — NEEDS VERIFICATION
M24 × 2fine22222Unavailable — NEEDS VERIFICATION
M24 × 3coarse32121Unavailable — NEEDS VERIFICATION

03 / How to use

How to use this calculator

  1. Confirm that the drawing specifies M16 × 2 and not another M16 pitch.
  2. Select the M16 × 2 — coarse preset in the calculator (it is preselected on this page), or enter D and P directly.
  3. The calculator has no tap-type or material input; it shows a D − P cutting-tap estimate and a provisional manufacturer chart drill (to be verified), and note whether the tap will be driven by hand or machine.
  4. Read the drill size from the result and record the setup assumptions.
  5. For a blind hole, provide depth for the tap chamfer and chips, and verify that the required thread length fits.
  6. Check the hole position, thread gauge and finished thread depth before assembly.

Table lookup, with explicit boundaries

Cutting-tap estimate: drill ≈ D − P.
Example: M8 × 1.25 → 8 − 1.25 = 6.75 mm (estimate).
The separate 6.8 mm manufacturer chart entry is provisional; it is not obtained by silently rounding every D − P result.
Minor-diameter limits are unavailable and are not derived from this formula.

Thread entries are selected discrete diameter/pitch pairs, not continuous standard ranges. Custom positive inputs with D > P are allowed for the formula only. A custom pair without chart data shows “Not tabulated”.

04 / Engineering context

M16 × 2 Tap Drill: Core Hole for a Large Metric Coarse Thread

M16 × 2 is a large ISO metric coarse thread used on frames, heavy brackets and machine connections. The tap removes a substantial amount of material, and the torque required is correspondingly high. Read the core-hole size from the calculator for M16 × 2; do not estimate it from the nominal diameter or from a smaller thread.

Hand tapping is possible but demanding: the tap needs a stable, guided hold and the workpiece must not move under load. Machine tapping is more common in production, where a rigid setup and good chip evacuation matter. A hole that is not perpendicular or a drill that has wandered can produce a thread that is difficult to assemble even if the core hole itself is within limits.

The larger the thread, the more the consequences of a poor core hole are felt in torque and engagement. Forming taps can be productive in suitable ductile materials, but they need a precise hole and good lubrication. Use the calculator result for M16 × 2 as the starting point, then confirm the tapping method and hole limits with the tap manufacturer.

Thread data sources and verification

Pitch and drill candidates were transcribed from the Tapmatic manufacturer chart; the M8 × 1.25 drill is from the Guhring SuperLine catalogue. Tapmatic’s chart assumes job drills cutting about 0.003 inch oversize. Manufacturer choices can differ.

NEEDS VERIFICATION: selected pitches against ISO 261 / ISO 262; recommended drills against ISO 2306 / DIN 336; minor-diameter limits against the specified thread tolerance standard and class. No minor-diameter limits are supplied.

06 / Questions

Frequently asked questions

What drill size should I use for M16 × 2?

Use the calculator on this page for the M16 × 2 selection, which shows a D − P cutting-tap estimate and a provisional chart drill (to be verified). The answer belongs to those conditions; it is not a universal value for every M16 thread.

Is M16 × 2 a coarse thread?

Yes. M16 × 2 is the ISO metric coarse thread for the M16 nominal size. A different pitch would be a different thread and would need its own core-hole selection.

Can I hand tap M16 × 2?

Hand tapping is possible, but the tap requires significant torque and a stable, guided hold. The workpiece must be clamped securely, and the tap should be started straight. For repetitive work, machine tapping is usually more controllable.

What setup does machine tapping M16 × 2 need?

A rigid machine, a suitable tap holder or synchronized spindle, good workholding and effective chip evacuation are important. Alignment should be checked before tapping, because a large tap will follow a poorly positioned hole and may damage the thread.

How do I handle a blind M16 × 2 hole?

Provide enough drill depth for the tap chamfer and chips, and specify the thread depth separately. Use a tap style suited to blind holes and clear chips where the operation allows. A bottoming tap can reduce the chamfer allowance but does not remove the need for clearance.

Can I use a forming tap for M16 × 2?

A forming tap can be productive in ductile materials when the hole is precise and lubrication is consistent. It needs a different core hole from a cutting tap and is not suitable for every material. Do not reuse a cutting-tap result; confirm the forming-tap data with the tap maker.

What should I inspect on a finished M16 × 2 thread?

Check the thread with the specified gauge, confirm the depth and inspect for tearing, incomplete threads or damage from chips. Also check that the hole has not drifted, since a position error at this size can prevent assembly even when the thread itself gauges correctly.