EngineeringFitsEnglish tool

The engineering workbench / fits and machine elements

M4 × 0.7 Tap Drill: Core Hole for Metric Coarse Thread

Estimate a cutting-tap drill as nominal thread diameter D minus pitch P. Compare that estimate with provisional manufacturer chart drills for selected metric coarse and fine threads.

Selected candidate ISO 261/262 metric pitch series only. Pitch assignments, chart drill sizes and all minor-diameter limits NEEDS VERIFICATION. Forming taps are outside this calculator.

ISO BASIC PROFILEM4 × 0.7
M4 × 0.7 internal thread profile with tap drillAxial section of an M4 × 0.7 internal thread drawn to ISO 68-1 basic-profile proportions. Major diameter D 4 mm; basic minor diameter D1 = D − 1.0825 P ≈ 3.242 mm; provisional chart tap drill 3.3 mm, shown dashed. Chart drill and minor-diameter values are to be verified.⌀D1 ≈ 3.242 basic minor⌀D = 4 majortap drill ⌀3.3*Pitch P = 0.7 · internal thread, axial section

3.3 mm D − P estimate · *chart drill 3.3 mm, provisional, to be verified

02 / Read the limits

Results

Dimensions and deviations in mm. Verification notes apply to the displayed source.

CharacteristicResult · mmInterpretation
Thread D × P4 × 0.7 mmcoarse; pitch series NEEDS VERIFICATION against ISO 261/262.
Cutting-tap estimate D − P3.3 mmApproximation; excludes forming taps.
Provisional chart drill3.3 mmNEEDS VERIFICATION against ISO 2306 / DIN 336; manufacturer-specific.
Minor-diameter limitsNEEDS VERIFICATIONNot supplied; no tolerance class or limits inferred from D − P.

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

Selected coarse and fine pitch table — NEEDS VERIFICATION

ThreadSeriesPitch · mmD − P estimate · mmProvisional chart drill · mmMinor limits / status
M3 × 0.5coarse0.52.52.5Unavailable — NEEDS VERIFICATION
M4 × 0.7coarse0.73.33.3Unavailable — NEEDS VERIFICATION
M5 × 0.8coarse0.84.24.2Unavailable — NEEDS VERIFICATION
M6 × 1coarse155Unavailable — NEEDS VERIFICATION
M8 × 1.25coarse1.256.756.8Unavailable — NEEDS VERIFICATION
M10 × 1.25fine1.258.758.7Unavailable — NEEDS VERIFICATION
M10 × 1.5coarse1.58.58.5Unavailable — NEEDS VERIFICATION
M12 × 1.25fine1.2510.7510.8Unavailable — NEEDS VERIFICATION
M12 × 1.75coarse1.7510.2510.2Unavailable — NEEDS VERIFICATION
M16 × 1.5fine1.514.514.5Unavailable — NEEDS VERIFICATION
M16 × 2coarse21414Unavailable — NEEDS VERIFICATION
M20 × 1.5fine1.518.518.5Unavailable — NEEDS VERIFICATION
M20 × 2.5coarse2.517.517.5Unavailable — NEEDS VERIFICATION
M24 × 2fine22222Unavailable — NEEDS VERIFICATION
M24 × 3coarse32121Unavailable — NEEDS VERIFICATION

03 / How to use

How to use this calculator

  1. Confirm that the drawing calls out M4 × 0.7 and not a different M4 pitch.
  2. Select the M4 × 0.7 — coarse preset in the calculator (it is preselected on this page), or enter D and P directly.
  3. The calculator has no tap-type or material input; it shows a D − P cutting-tap estimate and a provisional manufacturer chart drill (to be verified). Cutting and forming taps do not share the same hole requirement, so read the result with the stated tap condition in mind.
  4. Read the drill size from the result and keep it with the material and tap assumptions used.
  5. For a thin section, check that the available engagement supports the joint before accepting the hole size.
  6. For a blind hole, allow depth for the tap chamfer and chip clearance, then inspect the finished thread.

Table lookup, with explicit boundaries

Cutting-tap estimate: drill ≈ D − P.
Example: M8 × 1.25 → 8 − 1.25 = 6.75 mm (estimate).
The separate 6.8 mm manufacturer chart entry is provisional; it is not obtained by silently rounding every D − P result.
Minor-diameter limits are unavailable and are not derived from this formula.

Thread entries are selected discrete diameter/pitch pairs, not continuous standard ranges. Custom positive inputs with D > P are allowed for the formula only. A custom pair without chart data shows “Not tabulated”.

04 / Engineering context

M4 × 0.7 Tap Drill: Core Hole for a Small Metric Coarse Thread

M4 × 0.7 is the ISO metric coarse thread for M4 fasteners. It appears in small brackets, instrument cases, covers and light-duty assemblies where a little more material is available than at M3 but the tap is still easy to overload. Read the core-hole size from the calculator for the exact M4 × 0.7 callout, not for a different M4 pitch or a nearby imperial thread.

At this size the difference between a well-controlled hole and an oversized one is easy to feel at the tap but hard to see afterward. A tight hole can increase torque and lead to thread tearing or breakage; an open hole can leave too little engagement in a thin section. Drilled hole quality, including roundness, straightness and burr at breakthrough, matters as much as the nominal drill diameter.

In thin sheet, a tapped M4 × 0.7 hole may have limited engagement because the sheet thickness caps the usable thread length. A nut, insert or thicker boss can be a better design choice than forcing a tight core hole. For the hole itself, use the calculator, then confirm the tap type, material and any coating or plating effect with the tap maker.

Thread data sources and verification

Pitch and drill candidates were transcribed from the Tapmatic manufacturer chart; the M8 × 1.25 drill is from the Guhring SuperLine catalogue. Tapmatic’s chart assumes job drills cutting about 0.003 inch oversize. Manufacturer choices can differ.

NEEDS VERIFICATION: selected pitches against ISO 261 / ISO 262; recommended drills against ISO 2306 / DIN 336; minor-diameter limits against the specified thread tolerance standard and class. No minor-diameter limits are supplied.

06 / Questions

Frequently asked questions

What drill size should I use for M4 × 0.7?

Read the size from the calculator on this page for the M4 × 0.7 selection, which shows a D − P cutting-tap estimate and a provisional chart drill (to be verified). A drill quoted for a different tap type, material or engagement target is not a safe substitute.

Is M4 × 0.7 a coarse thread?

Yes. M4 × 0.7 is the ISO metric coarse thread for the M4 nominal size. The pitch is part of the designation, so an M4 thread with another pitch needs its own core-hole selection.

Can M4 × 0.7 be tapped in thin sheet?

It can be attempted, but the sheet thickness limits thread engagement, and a tight core hole will not create more material. A nut, threaded insert or thicker boss is often a more reliable design. The drawing should make the intended joint clear before the hole is drilled.

Should I use a forming tap for M4 × 0.7?

A forming tap can work in ductile materials when the hole is precise and lubrication is adequate. It displaces material instead of cutting chips, so its core-hole requirement differs from a cutting tap's. Do not reuse a cutting-tap result; follow the tap maker's forming-tap data.

How do I handle chips in a blind M4 × 0.7 hole?

Use a tap style suited to blind holes, provide depth below the required thread for the chamfer and chips, and clear the hole during tapping if the operation allows it. Packed chips raise torque and can damage the thread or the tap.

Does the M4 × 0.7 hole size change for stainless steel?

It may, because stainless grades can work-harden and behave differently from aluminum or mild steel. The tap manufacturer's recommendation for the specific grade and tap is the better guide than a rule transferred from another material.

What should I check if the drilled hole comes out oversize?

Check the drill for wear or damage, the spindle or chuck for runout, and the setup for vibration. A sharp drill and a stable setup are more reliable than compensating with a different nominal size. Verify the actual hole before tapping a production part.