EngineeringFitsEnglish tool

The engineering workbench / fits and machine elements

M20 × 2.5 Tap Drill: Core Hole for Metric Coarse Thread

Estimate a cutting-tap drill as nominal thread diameter D minus pitch P. Compare that estimate with provisional manufacturer chart drills for selected metric coarse and fine threads.

Selected candidate ISO 261/262 metric pitch series only. Pitch assignments, chart drill sizes and all minor-diameter limits NEEDS VERIFICATION. Forming taps are outside this calculator.

ISO BASIC PROFILEM20 × 2.5
M20 × 2.5 internal thread profile with tap drillAxial section of an M20 × 2.5 internal thread drawn to ISO 68-1 basic-profile proportions. Major diameter D 20 mm; basic minor diameter D1 = D − 1.0825 P ≈ 17.294 mm; provisional chart tap drill 17.5 mm, shown dashed. Chart drill and minor-diameter values are to be verified.⌀D1 ≈ 17.294 basic minor⌀D = 20 majortap drill ⌀17.5*Pitch P = 2.5 · internal thread, axial section

17.5 mm D − P estimate · *chart drill 17.5 mm, provisional, to be verified

02 / Read the limits

Results

Dimensions and deviations in mm. Verification notes apply to the displayed source.

CharacteristicResult · mmInterpretation
Thread D × P20 × 2.5 mmcoarse; pitch series NEEDS VERIFICATION against ISO 261/262.
Cutting-tap estimate D − P17.5 mmApproximation; excludes forming taps.
Provisional chart drill17.5 mmNEEDS VERIFICATION against ISO 2306 / DIN 336; manufacturer-specific.
Minor-diameter limitsNEEDS VERIFICATIONNot supplied; no tolerance class or limits inferred from D − P.

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

Selected coarse and fine pitch table — NEEDS VERIFICATION

ThreadSeriesPitch · mmD − P estimate · mmProvisional chart drill · mmMinor limits / status
M3 × 0.5coarse0.52.52.5Unavailable — NEEDS VERIFICATION
M4 × 0.7coarse0.73.33.3Unavailable — NEEDS VERIFICATION
M5 × 0.8coarse0.84.24.2Unavailable — NEEDS VERIFICATION
M6 × 1coarse155Unavailable — NEEDS VERIFICATION
M8 × 1.25coarse1.256.756.8Unavailable — NEEDS VERIFICATION
M10 × 1.25fine1.258.758.7Unavailable — NEEDS VERIFICATION
M10 × 1.5coarse1.58.58.5Unavailable — NEEDS VERIFICATION
M12 × 1.25fine1.2510.7510.8Unavailable — NEEDS VERIFICATION
M12 × 1.75coarse1.7510.2510.2Unavailable — NEEDS VERIFICATION
M16 × 1.5fine1.514.514.5Unavailable — NEEDS VERIFICATION
M16 × 2coarse21414Unavailable — NEEDS VERIFICATION
M20 × 1.5fine1.518.518.5Unavailable — NEEDS VERIFICATION
M20 × 2.5coarse2.517.517.5Unavailable — NEEDS VERIFICATION
M24 × 2fine22222Unavailable — NEEDS VERIFICATION
M24 × 3coarse32121Unavailable — NEEDS VERIFICATION

03 / How to use

How to use this calculator

  1. Confirm that the drawing specifies M20 × 2.5 and not another M20 pitch.
  2. Select the M20 × 2.5 — coarse preset in the calculator (it is preselected on this page), or enter D and P directly.
  3. The calculator has no tap-type or material input; it shows a D − P cutting-tap estimate and a provisional manufacturer chart drill (to be verified), and note the machine or hand setup that will be used.
  4. Read the drill size from the result and record the conditions behind it.
  5. For a blind hole, allow depth for the tap chamfer and chips, and check the required thread depth.
  6. Verify hole position, thread gauge and depth before assembling the joint.

Table lookup, with explicit boundaries

Cutting-tap estimate: drill ≈ D − P.
Example: M8 × 1.25 → 8 − 1.25 = 6.75 mm (estimate).
The separate 6.8 mm manufacturer chart entry is provisional; it is not obtained by silently rounding every D − P result.
Minor-diameter limits are unavailable and are not derived from this formula.

Thread entries are selected discrete diameter/pitch pairs, not continuous standard ranges. Custom positive inputs with D > P are allowed for the formula only. A custom pair without chart data shows “Not tabulated”.

04 / Engineering context

M20 × 2.5 Tap Drill: Core Hole for a Heavy Metric Coarse Thread

M20 × 2.5 is a heavy ISO metric coarse thread used in structural brackets, machine bases and large assemblies. Tapping at this size requires a rigid setup, a well-clamped workpiece and a plan for handling the tap's torque. Read the core-hole size from the calculator for M20 × 2.5; the value belongs to that designation and the selected tap conditions.

Large drills can wander, and a small position error at the drill becomes a larger problem when the tap follows. Step drilling or a boring operation may be used to control the hole, depending on the equipment and the requirement. The core hole also determines how much material the tap must remove, which affects torque, heat and chip volume.

Forming taps may be attractive in ductile materials because they avoid chips, but they demand a precise hole and consistent lubrication. Cutting taps need chip clearance, especially in blind holes. Use the calculator, then confirm the complete process with the tap manufacturer and the drawing's thread and depth requirements.

Thread data sources and verification

Pitch and drill candidates were transcribed from the Tapmatic manufacturer chart; the M8 × 1.25 drill is from the Guhring SuperLine catalogue. Tapmatic’s chart assumes job drills cutting about 0.003 inch oversize. Manufacturer choices can differ.

NEEDS VERIFICATION: selected pitches against ISO 261 / ISO 262; recommended drills against ISO 2306 / DIN 336; minor-diameter limits against the specified thread tolerance standard and class. No minor-diameter limits are supplied.

06 / Questions

Frequently asked questions

What drill size should I use for M20 × 2.5?

Read it from the calculator on this page for the M20 × 2.5 selection, which shows a D − P cutting-tap estimate and a provisional chart drill (to be verified). A value from another thread or a different tap type is not a safe substitute.

Is M20 × 2.5 a coarse thread?

Yes. M20 × 2.5 is the ISO metric coarse thread for the M20 nominal size. A different pitch would be a different thread with its own core-hole requirement.

What equipment is needed to tap M20 × 2.5?

The tap needs a rigid setup that can control alignment and torque. Machine tapping is common in production; hand tapping requires a substantial tap wrench, a stable workpiece and careful control. The workpiece must be clamped so it cannot move under load.

Should I step drill the hole for M20 × 2.5?

Step drilling can reduce the load on the final drill and help control the hole, but it is a process choice rather than a requirement. Whether it is needed depends on the equipment, the material and the hole quality required. The final core-hole size still comes from the calculator.

How do I manage chips in a blind M20 × 2.5 hole?

Use a tap style suited to blind holes, provide depth below the required thread for the chamfer and chips, and clear the hole during tapping if the setup allows. Packed chips can raise torque sharply in a large thread.

Can I use a forming tap for M20 × 2.5?

A forming tap can be used in suitable ductile materials when the core hole is precise and lubrication is consistent. It avoids chips but needs a different hole from a cutting tap. Do not reuse a cutting-tap result; confirm the forming-tap requirement with the manufacturer.

What should I check after tapping M20 × 2.5?

Check the thread with the specified gauge, confirm the thread depth and inspect for tears or incomplete threads. Check hole position as well, because a large fastener has less tolerance for misalignment during assembly.