EngineeringFitsEnglish tool

The engineering workbench / fits and machine elements

M6 × 1 Tap Drill: Core Hole for Metric Coarse Thread

Estimate a cutting-tap drill as nominal thread diameter D minus pitch P. Compare that estimate with provisional manufacturer chart drills for selected metric coarse and fine threads.

Selected candidate ISO 261/262 metric pitch series only. Pitch assignments, chart drill sizes and all minor-diameter limits NEEDS VERIFICATION. Forming taps are outside this calculator.

ISO BASIC PROFILEM6 × 1
M6 × 1 internal thread profile with tap drillAxial section of an M6 × 1 internal thread drawn to ISO 68-1 basic-profile proportions. Major diameter D 6 mm; basic minor diameter D1 = D − 1.0825 P ≈ 4.917 mm; provisional chart tap drill 5 mm, shown dashed. Chart drill and minor-diameter values are to be verified.⌀D1 ≈ 4.917 basic minor⌀D = 6 majortap drill ⌀5*Pitch P = 1 · internal thread, axial section

5 mm D − P estimate · *chart drill 5 mm, provisional, to be verified

02 / Read the limits

Results

Dimensions and deviations in mm. Verification notes apply to the displayed source.

CharacteristicResult · mmInterpretation
Thread D × P6 × 1 mmcoarse; pitch series NEEDS VERIFICATION against ISO 261/262.
Cutting-tap estimate D − P5 mmApproximation; excludes forming taps.
Provisional chart drill5 mmNEEDS VERIFICATION against ISO 2306 / DIN 336; manufacturer-specific.
Minor-diameter limitsNEEDS VERIFICATIONNot supplied; no tolerance class or limits inferred from D − P.

A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.

Selected coarse and fine pitch table — NEEDS VERIFICATION

ThreadSeriesPitch · mmD − P estimate · mmProvisional chart drill · mmMinor limits / status
M3 × 0.5coarse0.52.52.5Unavailable — NEEDS VERIFICATION
M4 × 0.7coarse0.73.33.3Unavailable — NEEDS VERIFICATION
M5 × 0.8coarse0.84.24.2Unavailable — NEEDS VERIFICATION
M6 × 1coarse155Unavailable — NEEDS VERIFICATION
M8 × 1.25coarse1.256.756.8Unavailable — NEEDS VERIFICATION
M10 × 1.25fine1.258.758.7Unavailable — NEEDS VERIFICATION
M10 × 1.5coarse1.58.58.5Unavailable — NEEDS VERIFICATION
M12 × 1.25fine1.2510.7510.8Unavailable — NEEDS VERIFICATION
M12 × 1.75coarse1.7510.2510.2Unavailable — NEEDS VERIFICATION
M16 × 1.5fine1.514.514.5Unavailable — NEEDS VERIFICATION
M16 × 2coarse21414Unavailable — NEEDS VERIFICATION
M20 × 1.5fine1.518.518.5Unavailable — NEEDS VERIFICATION
M20 × 2.5coarse2.517.517.5Unavailable — NEEDS VERIFICATION
M24 × 2fine22222Unavailable — NEEDS VERIFICATION
M24 × 3coarse32121Unavailable — NEEDS VERIFICATION

03 / How to use

How to use this calculator

  1. Confirm that the drawing calls out M6 × 1 and not another M6 pitch.
  2. Select the M6 × 1 — coarse preset in the calculator (it is preselected on this page), or enter D and P directly.
  3. The calculator has no tap-type or material input; it shows a D − P cutting-tap estimate and a provisional manufacturer chart drill (to be verified), and note whether the hole is through or blind because that affects tap choice.
  4. Read the drill size from the result. Do not reuse a value from a different M6 pitch or from another material.
  5. For a blind hole, provide enough depth for the tap chamfer and chips, and specify thread depth separately.
  6. Check the completed thread with the specified gauge and the drawing requirement.

Table lookup, with explicit boundaries

Cutting-tap estimate: drill ≈ D − P.
Example: M8 × 1.25 → 8 − 1.25 = 6.75 mm (estimate).
The separate 6.8 mm manufacturer chart entry is provisional; it is not obtained by silently rounding every D − P result.
Minor-diameter limits are unavailable and are not derived from this formula.

Thread entries are selected discrete diameter/pitch pairs, not continuous standard ranges. Custom positive inputs with D > P are allowed for the formula only. A custom pair without chart data shows “Not tabulated”.

04 / Engineering context

M6 × 1 Tap Drill: Core Hole for a Widely Used Metric Coarse Thread

M6 × 1 is a widely used ISO metric coarse thread. Its size makes it practical for general brackets, guards, covers and machine fittings, and it is large enough for a reasonably robust tap while still being easy to damage through misalignment. Read the core-hole size from the calculator for the M6 × 1 callout; the result is specific to the selected tap and material assumptions.

Through holes are more forgiving because chips can exit ahead of the tap. Blind holes need enough drill depth for the tap chamfer and for chips to collect, and a spiral-flute or bottoming tap may be more suitable than a standard hand tap. The core hole should not be opened simply to make chips fit; that trades engagement for convenience.

Machine tapping and hand tapping can produce different results from the same nominal hole because of alignment, feed control and lubrication. The thread callout and the drawing's depth requirement still govern the part. Use the calculator to get the M6 × 1 core hole, then confirm the tap series and cutting data with the tap manufacturer for the material being run.

Thread data sources and verification

Pitch and drill candidates were transcribed from the Tapmatic manufacturer chart; the M8 × 1.25 drill is from the Guhring SuperLine catalogue. Tapmatic’s chart assumes job drills cutting about 0.003 inch oversize. Manufacturer choices can differ.

NEEDS VERIFICATION: selected pitches against ISO 261 / ISO 262; recommended drills against ISO 2306 / DIN 336; minor-diameter limits against the specified thread tolerance standard and class. No minor-diameter limits are supplied.

06 / Questions

Frequently asked questions

What drill size should I use for M6 × 1?

Read it from the calculator on this page for the M6 × 1 selection, which shows a D − P cutting-tap estimate and a provisional chart drill (to be verified). The result is tied to those conditions, so a value from another chart or another M6 pitch is not a direct substitute.

Is M6 × 1 a coarse thread?

Yes. M6 × 1 is the ISO metric coarse thread for the M6 nominal size. The pitch belongs to the designation, and a different pitch would require a different core-hole selection.

Is M6 × 1 suitable for through holes and blind holes?

The thread can be used in either, but the tapping approach differs. Through holes let chips exit ahead of the tap. Blind holes need depth clearance and a tap style that manages chips, such as a spiral-flute or bottoming design. The core hole still comes from the calculator for the selected tool.

Can I tap M6 × 1 on a CNC machine?

Yes, with a suitable tapping holder or synchronized spindle and a rigid setup. Machine tapping can improve consistency, but alignment, feed matching and chip evacuation still matter. Confirm the tap maker's cutting data for the material and use the calculator result for the core hole.

Should I use a forming tap for M6 × 1?

A forming tap can be a good choice in ductile materials when the hole is precise and lubrication is reliable. It does not produce chips, which can help in blind holes, but it is not suitable for every material. Do not reuse a cutting-tap result for a forming tap; confirm the forming-tap hole with the tap maker.

Does the M6 × 1 core hole change with material?

It can. Material ductility, work-hardening behavior and chip formation affect how the tap performs and may call for a different hole recommendation from the tap manufacturer. The thread designation stays the same, but the process should be matched to the material.

What should I check after tapping M6 × 1?

Check the thread with the specified gauge, confirm the thread depth and inspect for torn or incomplete threads. A mating fastener is a useful functional check, but it does not replace the drawing's inspection requirement.