The engineering workbench / fits and machine elements
M24 × 3 Tap Drill: Core Hole for Metric Coarse Thread
Estimate a cutting-tap drill as nominal thread diameter D minus pitch P. Compare that estimate with provisional manufacturer chart drills for selected metric coarse and fine threads.
Selected candidate ISO 261/262 metric pitch series only. Pitch assignments, chart drill sizes and all minor-diameter limits NEEDS VERIFICATION. Forming taps are outside this calculator.
21 mm D − P estimate · *chart drill 21 mm, provisional, to be verified
02 / Read the limits
Results
Dimensions and deviations in mm. Verification notes apply to the displayed source.
| Characteristic | Result · mm | Interpretation |
|---|---|---|
| Thread D × P | 24 × 3 mm | coarse; pitch series NEEDS VERIFICATION against ISO 261/262. |
| Cutting-tap estimate D − P | 21 mm | Approximation; excludes forming taps. |
| Provisional chart drill | 21 mm | NEEDS VERIFICATION against ISO 2306 / DIN 336; manufacturer-specific. |
| Minor-diameter limits | NEEDS VERIFICATION | Not supplied; no tolerance class or limits inferred from D − P. |
A missing table entry is displayed as “No tabulated value”; values are never interpolated. Individual drawing requirements take precedence over a general lookup.
Selected coarse and fine pitch table — NEEDS VERIFICATION
| Thread | Series | Pitch · mm | D − P estimate · mm | Provisional chart drill · mm | Minor limits / status |
|---|---|---|---|---|---|
| M3 × 0.5 | coarse | 0.5 | 2.5 | 2.5 | Unavailable — NEEDS VERIFICATION |
| M4 × 0.7 | coarse | 0.7 | 3.3 | 3.3 | Unavailable — NEEDS VERIFICATION |
| M5 × 0.8 | coarse | 0.8 | 4.2 | 4.2 | Unavailable — NEEDS VERIFICATION |
| M6 × 1 | coarse | 1 | 5 | 5 | Unavailable — NEEDS VERIFICATION |
| M8 × 1.25 | coarse | 1.25 | 6.75 | 6.8 | Unavailable — NEEDS VERIFICATION |
| M10 × 1.25 | fine | 1.25 | 8.75 | 8.7 | Unavailable — NEEDS VERIFICATION |
| M10 × 1.5 | coarse | 1.5 | 8.5 | 8.5 | Unavailable — NEEDS VERIFICATION |
| M12 × 1.25 | fine | 1.25 | 10.75 | 10.8 | Unavailable — NEEDS VERIFICATION |
| M12 × 1.75 | coarse | 1.75 | 10.25 | 10.2 | Unavailable — NEEDS VERIFICATION |
| M16 × 1.5 | fine | 1.5 | 14.5 | 14.5 | Unavailable — NEEDS VERIFICATION |
| M16 × 2 | coarse | 2 | 14 | 14 | Unavailable — NEEDS VERIFICATION |
| M20 × 1.5 | fine | 1.5 | 18.5 | 18.5 | Unavailable — NEEDS VERIFICATION |
| M20 × 2.5 | coarse | 2.5 | 17.5 | 17.5 | Unavailable — NEEDS VERIFICATION |
| M24 × 2 | fine | 2 | 22 | 22 | Unavailable — NEEDS VERIFICATION |
| M24 × 3 | coarse | 3 | 21 | 21 | Unavailable — NEEDS VERIFICATION |
03 / How to use
How to use this calculator
- Confirm that the drawing specifies M24 × 3 and not another M24 pitch.
- Select the M24 × 3 — coarse preset in the calculator (it is preselected on this page), or enter D and P directly.
- The calculator has no tap-type or material input; it shows a D − P cutting-tap estimate and a provisional manufacturer chart drill (to be verified), and note whether tapping will be manual or machine driven.
- Read the drill size from the result and record the conditions used.
- For a blind hole, allow depth for the tap chamfer and chips, and verify the required thread length.
- Check hole position, thread gauge and depth before assembly.
Table lookup, with explicit boundaries
Example: M8 × 1.25 → 8 − 1.25 = 6.75 mm (estimate).
The separate 6.8 mm manufacturer chart entry is provisional; it is not obtained by silently rounding every D − P result.
Minor-diameter limits are unavailable and are not derived from this formula.
Thread entries are selected discrete diameter/pitch pairs, not continuous standard ranges. Custom positive inputs with D > P are allowed for the formula only. A custom pair without chart data shows “Not tabulated”.
04 / Engineering context
M24 × 3 Tap Drill: Core Hole for a Heavy Metric Coarse Thread
M24 × 3 is a large ISO metric coarse thread for heavy machinery, structural connections and substantial fixtures. The tap and drill are large, the torque is high, and the cost of a spoiled hole is correspondingly greater. Read the core-hole size from the calculator for M24 × 3; do not substitute a value from another large metric thread.
At this size, hole position and straightness are as important as diameter. A drill that starts off-line or a setup that flexes under load can leave a hole that the tap cannot follow cleanly. Machine tapping is usual in production, with a rigid holder and a workpiece that is firmly supported. Hand tapping requires a tap wrench with adequate leverage and a stable setup.
Chip evacuation and lubrication remain important even though the tap is large. Blind holes need a depth allowance for the chamfer and chips, and the thread depth should be specified separately. Use the calculator result for M24 × 3, then verify the tap maker's data and the drawing before cutting the first part.
Thread data sources and verification
Pitch and drill candidates were transcribed from the Tapmatic manufacturer chart; the M8 × 1.25 drill is from the Guhring SuperLine catalogue. Tapmatic’s chart assumes job drills cutting about 0.003 inch oversize. Manufacturer choices can differ.
NEEDS VERIFICATION: selected pitches against ISO 261 / ISO 262; recommended drills against ISO 2306 / DIN 336; minor-diameter limits against the specified thread tolerance standard and class. No minor-diameter limits are supplied.
06 / Questions
Frequently asked questions
What drill size should I use for M24 × 3?
Use the calculator on this page for the M24 × 3 selection, which shows a D − P cutting-tap estimate and a provisional chart drill (to be verified). The result is specific to those conditions and is not a universal value for every M24 thread.
Is M24 × 3 a coarse thread?
Yes. M24 × 3 is the ISO metric coarse thread for the M24 nominal size. A different pitch would be a different thread with its own core-hole requirement.
Is M24 × 3 always machine tapped?
Machine tapping is usual in production because the tap requires high torque and consistent alignment. Hand tapping is possible with a suitably rigid tap wrench and a stable workpiece, but it is demanding. The chosen method should match the equipment and the number of parts.
How accurate does the drilled hole need to be for M24 × 3?
Hole position and straightness matter because the tap is large and will follow the hole. A drill that wanders can make the thread difficult to assemble even if the thread itself gauges correctly. Check the setup and the hole before tapping.
How do I handle a blind M24 × 3 hole?
Provide enough drill depth for the tap chamfer and chips, and specify the thread depth separately. Use a tap style suited to blind holes and clear chips where possible. The bottom of the hole needs clearance so the tap does not bottom out.
Can I use a forming tap for M24 × 3?
A forming tap can be productive in suitable ductile materials when the core hole is precise and lubrication is consistent. It avoids chips but needs a different hole from a cutting tap. Confirm the tap maker's recommendation for the material and machine setup.
What should I check on a finished M24 × 3 thread?
Check the thread with the specified gauge, confirm the depth and inspect for tearing, incomplete threads or chip damage. Check the hole position as well, since a large fastener leaves little room for misalignment during assembly.